Removing the front panel

1 PressOPEN to open the front panel.
2 Gripthe left side of the front panel and
pullit gently outward.
Takecare not to grip it too tightly or to drop
thefront panel and protect it from contact
withwater or other fluidsto prevent perma-
nentdamage.

Attaching the front panel

%Replacethe front panel by holding it
uprightto the unit and clipping it securely
intothe mounting hooks.
About the demo mode
Thisunit features two demonstration modes.
Oneis the reverse mode, the other is the fea-
turedemo mode.
!Youcannot cancel a demo mode when the
frontpanel is open.
Important
Thered lead (ACC) of this unit should be con-
nectedto a terminal coupled with ignition switch
on/offoperations. If this is not done, the vehicle
batterymay be drained.

Reverse mode

Ifyou do not per form an operation within
about30 seconds, screen indications start to
reverse,and then continue reversing ever y 10
seconds.Pressing button 5when power to
thisunit is turned off while the ignition switch
isset to ACC or ON cancels the reverse mode.
Pressbutton 5again to start the reverse
mode.

Featuredemo

Thefeature demo automatically starts when
powerto this unit is turned off while the igni-
tionswitch is set to ACC or ON. Pressing but-
ton6during feature demo operation cancels
thefeature demo mode. Press button 6again
tostart the feature mode. Remember that if
thefeature demo continues operating when
thecar engine is turned off, it may drain bat-
terypower.
Before YouStart
En 9
English
Section
01