Pioneer DEH-P7900BT Audio Adjustments, Introduction of audio adjustments, Receiving Movie

Section
02		Operating this unit
	Displaying BD address of this unit		Audio Adjustments
	1 Use MULTI-CONTROL to select		Introduction of audio adjustments
	Device info. in the function menu.
	The device name (e.g., Pioneer BT unit) of this
	unit appears in the display.
	2 Push MULTI-CONTROL left to switch to
	the BD address.
	12-digit hexadecimal string is displayed.
			1
	# Pushing MULTI-CONTROL right returns to the
	device name.		1 Audio display
			Shows the audio adjustment status.
	Selecting the incoming call screen		1 Press MULTI-CONTROL to display the
	It is possible to select an incoming call screen.
			main menu.
	Since the screen selection is available for		FUNCTION, AUDIO and ENTERTAINMENT
	each user, it is possible to select different		appear on the display.
	screens between the users.		2 Use MULTI-CONTROL to select AUDIO.
	1 Press MULTI-CONTROL to display the
			Turn to change the menu option; press to se-
	main menu.		lect.
	FUNCTION, AUDIO, ENTERTAINMENT and		The audio function name appears on the dis-
	RECEIVING MOVIE appear on the display.		play.
	2 Use MULTI-CONTROL to select		3 Turn MULTI-CONTROL to select the
	RECEIVING MOVIE.		audio function.
	Turn to change the menu option; press to se-		Turn MULTI-CONTROL to switch between the
	lect.		audio functions in the following order:
	3 Use MULTI-CONTROL to select the		Fader (balance adjustment)—Powerful (gra-
			phic equalizer adjustment)—50Hz (7-band
	screen.
			graphic equalizer adjustment)—LOUD (loud-
	Turn to change the menu option; press to se-
			ness)—Sub W.1 (subwoofer on/off setting)—
	lect.
			Sub W.2 (subwoofer setting)—Bass (bass
	Screen 1—Sceen 2—Screen 3—Screen 4
			boost)—HPF (high pass filter)—SLA (source
			level adjustment)
			# You can also select the audio function by
			pressing AUDIO on the remote control.
			# You can select the Sub W.2 only when sub-
			woofer output is turned on in Sub W.1.
			# When selecting the FM tuner as the source,
			you cannot switch to SLA.
			# To return to the display of each source, press
			BAND.
			# If you do not operate functions except for
			50Hz within about 30 seconds, the display is
			automatically returned to the ordinary display.

40 En