Pioneer DEH-P7900BT operation manual Tuner, Basic Operations, Adjusting the volume

Operating this unit

! External unit refers to a Pioneer product (such	Tuner
as one available in the future) that, although	Basic Operations
incompatible as a source, enables control of
basic functions by this unit. Two external units	 
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
! When this unit’s blue/white lead is connected
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antenna extends when
this unit’s source is turned on. To retract the
antenna, turn the source off.	1 Band indicator
	2 Stereo (5) indicator
Adjusting the volume	Shows when the selected frequency is being
% Use MULTI-CONTROL to adjust the	broadcast in stereo.
	3 LOC indicator
sound level.	Shows when local seek tuning is on.
	4 Preset number indicator
	5 Frequency indicator
	1 Press SOURCE to select the tuner.
	2 Press BAND to select a band.
	Press BAND until the desired band is dis-
	played, FM-1, FM-2, FM-3 for FM or AM.
	3 To perform manual tuning, push
	MULTI-CONTROL left or right.
	4 To perform seek tuning, push and hold
	MULTI-CONTROL left or right for about one
	second and release.
	The tuner will scan the frequencies until a
	broadcast strong enough for good reception is
	found.
	# You can cancel seek tuning by pushing
	MULTI-CONTROL left or right.
	# If you push and hold MULTI-CONTROL left or
	right you can skip stations. Seek tuning starts as
	soon as you release MULTI-CONTROL.
	Note
	Listening AM radio while connecting iPod to this
	unit may generate noise. In this case, disconnect
	iPod from this unit and noise is disappeared.

Section

02

English

En 13