English
6Select the type of installation for VIRTUAL DJ LE, then click [Next].

—When [Typical] is selected, plug-ins and other components are installed simultaneously. Normally select [Typical].

—When [Custom] is selected, you can select which components to install.

7 When the screen below is displayed, click [Install].

Installation begins.

The installation completed screen appears once installation is completed.

8 Click [Finish].

This completes the installation procedure.

VIRTUAL DJ LE is launched if [Launch VirtualDJ] on the screen is checked when [Finish] is clicked.

9Input the serial number attached to the VIRTUAL DJ LE software CD-ROM’s package, then click [OK].

About the installation procedure (Mac OS X)

1Insert the included VIRTUAL DJ LE software CD-ROM in the computer’s CD drive.

The [VirtualDJ_LE] icon appears on the screen.

2 Double-click the [VirtualDJ_LE] icon.

The contents of the CD-ROM are displayed.

3 Double-click [install_virtualdj_le_ergo_v7.x.x.pkg].

The VIRTUAL DJ LE installer is launched.

4Once the VirtualDJ LE (DDJ-ERGO) installer is launched, click [Continue].

5Read the contents of the license agreement carefully, click [Continue] and then click [Agree] to accept the license agreement.

If you do not agree to the license agreement, click [Disagree] to cancel installation.

6Select the type of installation for VIRTUAL DJ LE, then click [Install].

—Normally select standard installation to install.

—To install in a different location, click [Change Install Location...] and choose the place of installation.

Installation begins.

The installation completed screen appears once installation is completed.

7 Click [Close].

This completes the installation procedure.

Checking the latest information on the VIRTUAL DJ LE software

For the latest information on the operating environment and compatibil- ity, and to acquire the latest operating system, please visit the following Atomix productions website:

http://www.virtualdj.com

En 3