Operation
The screen above shows an example of
!The deck layout can be switched by clicking the [
] button on the computer’s screen.
Loading tracks and playing them
The following example describes the procedure for playing tracks with a
1Turn the rotary selector while pressing the [SHIFT] button to select a folder or item.
!When a folder or item with the [+] mark is selected and the rotary selector is pressed while pressing the [SHIFT] button, that folder or item is opened or closed.
2Release the [SHIFT] button then turn the rotary selector to select the track.3Press the [LOAD] button to load the selected track onto the deck.4Press the [f] button to play the track.!When this button is pressed again during playback, playback pauses.
Outputting sound
Set the volume of the power amplifiers connected to the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level. Note that if the volume is set too high, the output sound could be very loud.
1Operate the [GAIN] control and the channel faders to adjust the audio level output from the respective decks.
2Operate the crossfader to switch the deck whose sound is output from the speakers.
—Left edge: Sound is output from deck [A] or [C].
—Center: The sound of all the decks is mixed and output.
—Right edge: Sound is output from deck [B] or [D].
3Turn the [MASTER VOL] control to adjust the audio level of the speakers.