Pioneer DVR-640H-S manual Initial Setup menu Chapter, Using the Initial Setup menu

14The Initial Setup menu

Chapter 14

The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu.

Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

•Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •.

Setting	Options	Explanation
Basic
Clock Setting	Auto	Set the channel that broadcasts a clock signal and
		the clock will be set automatically.
	Manual •	If there is no channel that broadcasts a clock signal
		in your area, you can set the time and date manually.
	Display	Set preferences for time and date display format.

The clock must be set in order to use timer recording.

Input Line System 525 System		Use for NTSC or PAL-60 recording from an external
		input.
	625 System •	Use for standard PAL or SECAM recording.

See also About the input line system on page 119 for more information on this setting.

Power Save	On	No antenna input signals are passed through to the
		outputs when the recorder is in standby.
	Off •	When the recorder is in standby, all signals arriving
		at the antenna inputs are passed along to the
		outputs.

110

En