Pioneer DVR-640H-S manual Mpeg PCM

14The Initial Setup menu

Setting	Options		Explanation
DTS Out	On •		Output a DTS signal when a DTS source is being
			played.
	Off		Switch off the digital output when a DTS source is
			being played. Use when your connected equipment
			doesn’t have a DTS decoder. In this case, use the
			analog audio outputs.
96 kHz PCM Out	96 kHz	48 kHz •	Convert 96 kHz digital audio sources to 48 kHz out-
			put. Use if your connected equipment doesn’t sup-
			port 96 kHz sampling rate.
	96 kHz		Output 96 kHz digital audio when a 96 kHz source is
			being played.
MPEG Out	MPEG		Output an MPEG audio signal when a source using
			MPEG audio is being played.
	MPEG	PCM •	Convert sources with MPEG audio to Linear PCM out-
			put. Use if your connected equipment doesn’t have
			an MPEG audio decoder.
Audio DRC	On		Switches on Audio DRC (Dynamic Range Control).
			Use when listening to Dolby Digital material at low
			volume.
	Off •		Switches off Audio DRC.

Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby Digital.

Language

OSD Language	English •	Sets the language of the on-screen displays to
		English.
	available languages	Choose from the languages displayed for the on-
		screen displays.
Audio Language	English •	Sets the default audio language for DVD-Video play-
		back to English.
	available languages	Choose from the languages displayed to set the
		default audio language for DVD-Video playback.
	Other	Select to set the default audio language to some-
		thing other than the ones listed. See Selecting other
		languages for language options on page 120.

114

En