Pioneer DVR-640H-S manual Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs

06Playback

Playing CDs and WMA/MP3 discs

The table below shows the basic playback

controls for audio CDs1, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts

playback when paused.

REV SCAN FWD SCAN Except WMA: Press to start

scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV		NEXT	Press to skip to previous/next
			track (or folder for WMA/MP3
			disc). (During playback you can
			also use the front panel CH +/–
			buttons.)
	ABC	DEF	During playback, enter a track
GHI	JKL	MNO	number then press ENTER to
PQRS	TUV	WXYZ	skip directly to that track.
		CLEAR	Press CLEAR to clear a number
			entry and start again.
		CLEAR
		ENTER

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you can select

what to watch.2

PLAY Press to start playback. Video CD only: If RESUME is dis-

played on-screen, playback starts from the place last stopped.

STOP Press to stop playback.

Video CD only: You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts

playback when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scan- ning speed.

PREV	NEXT Press to skip to previous/next
	track.
	When a PBC menu is dis-
	played, press to display the pre-
	vious/next page. (During
	playback you can also use the
	front panel CH +/– buttons.)

Note

1If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels on page 64).

2When playing in PBC mode, some playback features, such as search, repeat and program play are not avail- able. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc Navigator (see Using the Disc Navigator with playback-only discs on page 59).

56

En