Pioneer DVR-640H-S manual Connecting up Connecting to an AV amplifier or receiver

02Connecting up

Connecting to an AV amplifier or receiver

To enjoy multichannel surround sound you need to connect this recorder to an AV amp/ receiver using the digital coaxial output. In addition to the digital connection, we recommend also connecting using the stereo analog connection.

You’ll probably also want to connect a video output to your AV amp/receiver. Use the standard (composite) video output (as shown here), or the S-video or component video connections.

AC IN

See also Audio Out on page 113 for how to set up the digital audio output. (Noise may be output from your speakers if the recorder is not set up to work with your AV amp/ receiver.)

	ANTENNA
	IN
TV	VIDEO
	IN
	4
AV amp/	VIDEO
	OUT
receiver
	1

DIGITAL IN	AUDIO/VIDEO
COAXIAL	INPUT

	2
3	ANTENNA
	IN (RF IN)

		Y		OUTPUT 1		INPUT 1/AUTOTPUTSTART1 REC		IN
			L
		R			R	L
DIGITAL	CONTROL	PB
OUT
								OUT
		PR
COAXIAL	IN	COMPONENT	AUDIO	VIDEO		AUDIO	VID O	ANTENNA
		VIDEO OUT	OUTPUT 2		S-VIDEO		ANTENNA
							INPUT 3
							OUT

1

Antenna/cable TV wall outlet

Important

•Do not connect this recorder to your TV ‘through’ your VCR or other component using A/V cables. Always connect it directly to your TV.

1Connect RF antenna cables as shown. This enables you to watch and record TV channels.

2Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your AV amp/receiver.

3Use an optical digital audio cable (not supplied) to connect the COAXIAL DIGITAL OUT jack on this recorder to an coaxial digital input on your AV amp/ receiver.

This enables you to listen to multichannel surround sound.1

4Connect the AV amp/receiver’s video output to a video input on your TV.

Note

1If your AV amp/receiver doesn’t have an coaxial digital input, but has a optical type, converter boxes that convert from coaxial to optical are available at specialist audio dealers.

20

En