Pioneer DVR-640H-S manual Stopping a timer recording, Canceling or extending the timer

05Recording

Canceling or extending the timer

REC

1 Press and hold for three seconds during a timer recording.

Recording continues, but the timer indicator disappears from the front panel display indicating that the timer has been canceled.

REC

2 Press repeatedly to extend recording in 30 minute blocks.

Programming a new end time

You can edit the end time of a timer recording you have previously set.

HOME

MENU

1 Select ‘Timer Recording’ then ‘Timer Recording’ from the Home Menu.

2	Highlight the timer recording
you want to change.
	ENTER
3	Press	then select ‘Modify’

from the command menu panel. Alternatively, press ENTER.

The Timer Program Set screen appears, from which you can edit the settings.

4	ENTER
	Edit the end time as

necessary.

You can also edit the Extend time parameter.

	ENTER
5	Select ‘Store Program’.

HOME

MENU

6 Press to exit the Timer Recording screen.

Stopping a timer recording

	STOPREC
1	Press during a timer recording.
	ENTER
2	Select ‘Yes’ to confirm.

Preventing use of the recorder before a timer recording (child lock)

You can make all the front panel and remote control buttons inoperative using the child lock feature. This is useful when you set a timer recording and want to make sure that the timer settings are not changed before recording has finished.

STANDBY/ON

1 If the recorder is on, switch it into standby.

2 [Front panel] Press and hold for three seconds to lock the controls.

The front panel display briefly shows LOCK. If any buttons are pressed on the remote or front panel, LOCK is briefly displayed again.

•To unlock the recorder, press and hold STOP on the front panel (while the recorder is stopped) for three seconds until the display shows UNLOCK.

44

En