Pioneer DVR-640H-S manual Select ‘Start Rec’, Can’t get my DV camcorder to work with the recorder

Recording 05

	ENTER
7	Select ‘Start Rec’.
	Stop	Stop
	1.02.22
	Control with these	Start Rec
	buttons	Pause Rec
		Stop Rec
	HDD	SP (2h00m/DVD)
	Rem.	32h45m

•You can pause or stop the recording by selecting Pause Rec or Stop Rec from the on-screen display. You cannot control the camcorder from this remote control during recording.

•If you restart recording after stopping the camcorder, the first few seconds of the camcorder tape will not be recorded.

Use the pause button on your camcorder instead and recording will start immediately.

•HDD, DVD (VR Mode) and DVD-RAM only: A chapter marker is inserted every time there is a break in the timecode on the DV tape. This happens when the recording is stopped or paused then restarted, for example.

•While recording, you cannot exit the DV recording screen using the HOME MENU or RETURN button.

Frequently Asked Questions

•I can’t get my DV camcorder to work with the recorder!

Check that the DV cable is properly connected. Also make sure that what you’re trying to record is not copy- protected.

If it still doesn’t work, try switching off the camcorder then switch back on.

•There’s a picture, but no sound!

Try switching the DV Input setting (see DV Input on page 113) between Stereo 1 and Stereo 2.1

Note

1 If the audio subcode on the DV tape cannot be read correctly, the audio type will not switch automatically. You can switch the audio manually from the External Audio setting (page 113).

49

En