Pioneer DVR-640H-S Recording Using the built-in TV tuner, Changing audio channels, CH +/- buttons

05Recording

Using the built-in TV tuner

There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.

CH

•CH +/– buttons

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

CLEAR

• CLEAR Number buttons

For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4,

ENTER.1

• CH +/– buttons on the front panel

Changing audio channels

You can change the audio channel of the broadcast or external input signal.

AUDIO

• Press to change the audio type. The current audio channel is displayed on- screen.

•If the NICAM audio setting (see NICAM Select on page 112) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio.

•You can also select the language for a non-NICAM bilingual broadcast.

A (L) B (R)

A + B (L+R)

•When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 113), you can switch the audio channel between left (L), right (R) or both (L+R).

L R

L+R

Note

•When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 113).

NICAM

Regular

•If the NICAM broadcast is bilingual, you can also select the language.

NICAM A NICAM B

Regular NICAM A+B

Note

1 Channel presets are numbered 1 to 99.

34

En