Pioneer DVR-640H-S manual Nicam

14The Initial Setup menu

Setting	Options	Explanation
G-Code CH Setting	Next Screen	Proceed to the next screen to assign channel
		numbers to the guide channels as necessary. Look in
		your TV guide to see which channel numbers should
		be assigned to which guide channels. Press ENTER
		when your done to leave this screen.
Video In/Out Settings
Input Colour	Next Screen	Proceed to the next screen to set the input colour
System		system for the external input and the built-in TV
		tuner. Use the CH +/– buttons to change the preset.
		On the default Auto setting the recorder can gener-
		ally correctly detect whether the input signal is PAL,
		SECAM, 3.58 NTSC or PAL-60, but in some cases you
		may have to set it manually if the picture is displayed
		incorrectly.

See also About the input color system on page 120 for more information on this setting.

Component Video	Interlace •	Select if your monitor/TV is not compatible with pro-
Out		gressive-scan video.
	Progressive	Select if your monitor/TV is progressive-scan compat-
		ible. Check the operating instructions that came with
		your monitor/TV if you’re not sure.
NTSC on PAL TV	On	NTSC discs will play correctly on PAL-only TVs.
	Off •	Use if your TV is already NTSC-compatible.

Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with your TV. See also About NTSC on PAL TV on page 120 for related information.

Audio In

NICAM Select	NICAM •	Record the NICAM audio in a NICAM broadcast.
	Regular Audio	Record the non-NICAM audio in a NICAM broadcast.
		(You can still switch the audio to record using the
		AUDIO button before recording.)
Tuner Level	Normal •	Standard setting.
	Compression	Use if the audio level from the built-in tuner is exces-
		sive, causing distortion.

112

En