04Getting started

LINE1 INPUT/LINE2 INPUT

This unit comes with an S-Video input jack and Video input jack. When you use an S-Video or Video input jack, you must select the input mode.

Select “LINE1 INPUT” (“LINE2 INPUT”) and select the mode from the following list.

S-VIDEO

The video signal is input only from the S-Video input jack.

VIDEO

The video signal is input only from the video input jack.

Note

You can’t record the S-video input signal to video tape.

Setting the image quality

This section describes image quality settings.

Preparation:

Turn ON the TV and set it to the video input mode.

Select “AV SETUP 2” in “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23.

SETUP MENU

TIMER REC SET

 

 

AV SETUP 2

 

SYSTEM SETUP

 

BRIGHTNESS

STD

AV SETUP

 

 

 

 

 

REC SETUP

 

 

 

 

 

CH SETUP

 

 

 

 

 

OTHER

 

 

 

 

 

 

ENTER/

ENTER

RETURN

BACK

SETUP

END

SELECT

 

 

 

 

 

 

BRIGHTNESS

You can control the brightness level of the image. Select “BRIGHTNESS” and select the level from the list below.

MAX: The image becomes brighter.

STD: The image is of standard brightness.

MIN: The image becomes darker.

Setting the audio

This section describes audio settings.

Preparation:

Turn ON the TV and set it to the video input mode.

Select “AUDIO” from “AV SETUP”. For the proce- dure, see steps 1 to 3 in “Using the SETUP MENU” on page 23.

SETUP MENU

TIMER REC SET

 

AUDIO

 

 

SYSTEM SETUP

 

 

 

STD

 

DRC

 

 

 

AV SETUPEXTERNAL AUDIO INPUT

 

STEREO

 

 

 

 

 

OFF

REC SETUPSAP

 

 

 

 

 

 

 

 

 

CH SETUP

 

 

 

 

OTHER

 

 

 

 

 

 

 

SELECT

 

 

 

 

ENTER/

 

ENTER

RETURN

BACK

SETUP

END

SELECT

 

 

 

 

 

 

 

DRC

DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

Select “DRC” and select the level from the list below.

MAX: Full dynamic range is maintained.

STD: Full dynamic range is reduced.

TV: Dynamic range is reduced.

Note

This function works only during playback of Dolby Digital recorded discs.

When you listen to the sound from TV’s speaker, we recommend that you select “TV”.

The level of Dynamic Range Reduction may differ depending on the DVD.

30

En

Page 30
Image 30
Pioneer DVR-RT300 manual Setting the image quality, Setting the audio, LINE1 INPUT/LINE2 Input, Brightness, Drc