Pioneer DVR-RT300 Press or to select REC Mode and press, Select OK and press Enter, Recording

Recording 06

10 Press or to select “REC MODE” and press

ENTER.

The recording modes for the media selected in ÒREC TOÓ item are listed.

Select the recording mode and press ENTER.

For the recording modes in VCR, see page 48, and for the recording modes in DVD, see page 52.

SETUP MENU

				TIMER REC SET
	TYPE				ONCE	REC	REC
						TO	MODE
	DATE (MM/DD)				11/20(TH)
	START				08:00PM
	END				09:30PM
	CH				12
	REC TO				DVD
	REC MODE				LP
			OK
		SELECT
ENTER/		ENTER	RETURN		BACK	SETUP	END
SELECT

11 Select “OK” and press ENTER.

The timer program is determined and the TIMER REC SET screen appears again.

12When you enter the other program for the timer recording, repeat the steps 3 to 11.

13Press SETUP.

The TIMER REC SET screen disappears and the display will return to the normal screen.

14Press TIMER REC. The timer indicator “ ” will appear on the display and the unit stands by for

recording.

¥If the program is DVD recording only, the unit will change to VCR mode automatically. (The DVD mode cannot be selected.)

¥If the program is VCR recording only, the unit will change to DVD mode automatically. (The VCR mode cannot be selected.)

¥If the programs are DVD and VCR recording, the unit will turn off. If you want to use the unit, press TIMER REC again to deactivate the timer.

Checking or changing the timer recording

When you want to check the selected timer recording, follow the steps 1 and 2 of ÒSetting timer recordingÓ and display the TIMER REC SET screen.

To change the timer recording, select the program to be changed and press ENTER. The changing method is the same as that for the recording a program for the first time.

Cancelling the timer recording Display the TIMER REC SET screen.

Select the program you want to cancel and press CLEAR/CANCEL, then the selected program will be erased from the timer recording list.

In case timer programs-overlap

Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.

In this case, the next recording time is delayed a maximum of about 1 minute.

8 : 00 9 : 00 10 : 00 11 : 00

Program 1

Program 2
		Deleted Parts
Program 3
		Non Recorded Portion Parts
Recording	Prog.1	Prog.2	Prog.3
Control Settings

Note

¥Recording starts a few seconds before the preset starting time.

¥You cannot use the timer recording for the both DVD and VCR at the same time.

¥You can playback the DVD during the VCR timer recording, and you can playback the VCR during the DVD timer recording.

¥If a recordable tape is not inserted or no disc space

is available, the timer record indicator ÒÓ flashes. Replace the tape or disc to allow recording.

61

En