08Dubbing
Dubbing using other equipment
VR mode Video mode | VCR |
You can connect another VCR or camcorder for dubbing.
Preparation:
¥Typical connection: When using this unit as a recording device
Playback VCR
To Video OUT 
To Audio (R) OUT
To Audio (L) OUT
AUDIO/VIDEO cord (supplied)
Recording DVD/VCR
To Video IN 
To Audio (R) IN
To Audio (L) IN
You can also connect to the audio/video input jack (L1) at the rear side of this unit. In addition, each
Playback Camcorder 
To AV jack
Recording DVD/VCR
To Video IN 
To Audio (R) IN
To Audio (L) IN
AUDIO/VIDEO cord (not supplied)
When a video is recorded using this unit
Preparation:
¥Turn ON the TV and set the unit to the video input mode.
¥Select the input mode in LINE1 (LINE2) INPUT setting on page 30.
¥Load a video tape where the
¥To record onto a video tape, set the unit to VCR mode, whereas to record onto a disc, set it to DVD mode.
1Press INPUT SELECT and set the channel to L2 (or
L1).
L1 (LINE 1):on the rear panel
L2 (LINE 2):on the front panel
Confirm that L2 (or L1) appears on the display window.
2Press REC MODE/SPEED and select the recording mode.
VCR: SP or SLP (See page 48)
DVD: SP, LP, SLP or XP (See page 52)
3Press REC on this unit, then press PAUSE/STILL.
4Press the PLAY button on the playback device, then press the PAUSE/STILL button.
5Release the recording pause and the playback still simultaneously to begin the duplicating process.
6To stop dubbing, press STOP.
Note
¥When this unit is used as a playback device, a mark or a character displayed on the screen is also dubbed as an image. When the screen display is set to OFF, see ÒDISPLAY/CALLÓ on page 29.
¥If no special permission is obtained from the copyright owner, videos recorded from TV programs or movies can only be used for your own personal enjoyment.
¥You may not dub a copy protected video or DVD disc.
80
En
