Pioneer FH-P800BT Storing the strongest broadcast frequencies, Tuning in strong signals

	Section
Operating this unit	02

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press BAND

or LIST.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

Using the remote control

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same preset tun- ing button the radio station frequency is re-

called from memory.

# You can also recall radio station frequencies assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the fre- quency display.

Notes

!You can also select the function by pressing FUNCTION on the remote control.

!To return to the ordinary display, press BAND.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies.

1 Display the function menu.

Refer to Introduction to advanced operations on this page.

2Use MULTI-CONTROL to select BSM in the function menu.

3Press MULTI-CONTROL to turn BSM on. The six strongest broadcast frequencies are

stored in the order of their signal strength.

# To cancel, press MULTI-CONTROL again.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

Operating this unit

Introduction to advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se- lect.

The function menu is displayed.

3Turn MULTI-CONTROL to select the function.

BSM (best stations memory)—LOCAL (local seek tuning)

1 Display the function menu.

Refer to Introduction to advanced operations on this page.

2Use MULTI-CONTROL to select LOCAL in the function menu.

3Press MULTI-CONTROL to turn local

seek tuning on.

# To turn local seek tuning off, press MULTI-CONTROL again.

4Push MULTI-CONTROL left or right to set the sensitivity.

FM: LEVEL 1—LEVEL 2—LEVEL 3—LEVEL 4

AM: LEVEL 1—LEVEL 2

En 15