Pioneer FH-P800BT operation manual Using disc title functions, Entering disc titles

Section

02Operating this unit

%Press S.Rtrv repeatedly to select the de- sired setting.

OFF (off)—1—2

# 2 is more effective than 1.

Note

7Move the cursor to the last position by pushing MULTI-CONTROL right after enter- ing the title.

When you push MULTI-CONTROL right one more time, the entered title is stored in mem- ory.

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

8Press BAND to return to the playback display.

Using disc title functions

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD is dis- played.

Entering disc titles

Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long.

1 Display the function menu.

Refer to Introduction to advanced operations on page 18.

2Play the CD that you want to enter a title for.

3Use MULTI-CONTROL to select

TITLE INPUT in the function menu.

4Press DISP to select the desired charac- ter type.

Press DISP repeatedly to switch between the following character types: Alphabet—Numbers and symbols

5Push MULTI-CONTROL up or down to select a letter of the alphabet.

6Push MULTI-CONTROL left or right to move the cursor to the previous or next character position.

Notes

!Titles remain in memory, even after the disc is removed from the unit, and are recalled when the disc is reinserted.

!After data for 48 discs are stored in the mem- ory, data for a new disc overwrites the oldest one.

!If you connect a multi-CD player, you can input disc titles for up to 100 discs.

!When a multi-CD player that does not support

disc title functions is connected, you cannot enter disc titles in this unit.

20 En