Pioneer FH-P800BT operation manual Using the equalizer, Recalling equalizer curves, Fader/Balance

Section
03		Audio Adjustments
	Introduction of audio		Using balance adjustment
	adjustments		You can change the fader/balance setting so
			that it can provide the ideal listening environ-
			ment in all occupied seats.
			1 Display the audio menu.
			Refer to Introduction of audio adjustments on
			this page.
	1 Audio display		2 Use MULTI-CONTROL to select
		Shows the audio adjustment status.	FADER/BALANCE.
	1 Press MULTI-CONTROL to display the		3 Push MULTI-CONTROL up or down to
	main menu.		adjust front/rear speaker balance.
			Each time MULTI-CONTROL is pushed up or
	2 Use MULTI-CONTROL to select AUDIO.		down, the front/rear speaker balance moves
	Turn to change the menu option. Press to se-		towards the front or rear.
	lect.		F 15 to R 15 is displayed as the front/rear
	The audio menu is displayed.		speaker balance moves from front to rear.
	3 Turn MULTI-CONTROL to select the		# 0 is the proper setting when only two speakers
			are used.
	audio function.
			# When the rear output setting is
	Turn MULTI-CONTROL to switch between the
			REAR SP :S/W, you cannot adjust front/rear
	audio functions in the following order.
			speaker balance. Refer to Setting the rear output
	FADER/BALANCE (balance adjustment)—
			and subwoofer controller on page 49.
	EQUALIZER (graphic equalizer adjustment)—
	G.EQ ADJUST (7-band graphic equalizer ad-		4 Push MULTI-CONTROL left or right to
	justment)—LOUDNESS (loudness)—SUB W1		adjust left/right speaker balance.
	(subwoofer on/off setting)—SUB W2 (subwoo-		Each time MULTI-CONTROL is pushed left or
	fer setting)—BASS BOOST (bass boost)—		right, the left/right speaker balance moves to-
	HIGH PASS FILTER (high pass filter)—SLA		wards the left or right.
	(source level adjustment)		L 15 to R 15 is displayed as the left/right
	# You can also select the audio function by		speaker balance moves from left to right.
	pressing AUDIO on the remote control.
	# You can select the SUB W2 only when sub-

woofer output is turned on in SUB W1.

#When selecting FM as the source, you cannot switch to SLA.

#To return to the display of each source, press BAND.

#If you do not operate functions except for

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

G.EQ ADJUST within about 30 seconds, the dis- play is automatically returned to the ordinary dis- play.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

44 En