Selecting an XM channel directly
Whenusing the remote control, you can select
theXM channel directly by entering the de-
siredchannel number.
1 PressDIRECT.
Channelnumber input display appears.
2 Press0 to 9 to enter the desiredchannel
number.
#Youcan cancel the input number by pressing
CLEAR.
3 PressDIRECT.
TheXM channel of entered number is
selected.
#Afterentering the number input mode, if you
donot perform an operation within about eight
seconds,the mode is automatically canceled.
Switching the XM display
%PressDISP to switch the XM display.
#Youcan scroll the text information to the left
bypressing and holding DISP.
Storing and recallingbroadcast
stations
Youcan easily store up to six broadcast sta-
tionsfor later recall.
!Sixstations for each band can be stored in
memory.
1 PressLIST.
Presetscreen is displayed.
2 UseMULTI-CONTROL to store the se-
lectedstation in memory.
Turnto change the preset number. Press and
holdto store.
TheXM preset number youhave selected will
flashand then remain lit. The selected station
hasbeen stored in memor y.
3 UseMULTI-CONTROL to select the de-
siredstation.
Turnto change the station; press to select.
#Youcan also change the station by pushing
MULTI-CONTROLup or down.
#Ifyou do not operate the list within about 30
seconds,the display is automatically returned to
theordinary display.
Usingthe remote control
%Whenyou find a station that you want
tostore in memory, press one of preset
tuningbuttons 1 to 6 and hold until the
XMpreset number stops flashing.
Thenumber you have pressed willflash in the
XMpreset number indicator and then remain
lit.The selected station has been stored in
memory.
Thenext time you press the same preset tun-
ingbutton the station is recalled from mem-
ory.
#Youcan also recall stations assigned to preset
tuningnumbers by pushing MULTI-CONTROL up
ordown.
Switching the XM channelselect mode
Youhave two methods for selecting a channel:
bynumber and by category. When selecting
bynumber, channels in any category can be
selected.Select by category to narrow your
searchdown to only channels in a particular
category.
%PressSAT MODE repeatedly to select
thedesired channel select setting.
CHANNELNUMBER (channel number select
setting)—CATEGORY(channel category se-
lectsetting)
Note
Youcan also perform this operation in the menu
thatappears by using MULTI-CONTROL.
Available accessories
En
58
Section
06