Pioneer FH-P800BT Using subwoofer output, Adjusting loudness, Adjusting subwoofer settings

Section
03		Audio Adjustments
	3 Push MULTI-CONTROL left or right to		Using subwoofer output
	select the equalizer band to adjust.		This unit is equipped with a subwoofer output
	Each time MULTI-CONTROL is pushed left or
			which can be turned on or off.
	right, equalizer bands are selected in the fol-
	lowing order:		1 Display the audio menu.
	50HZ—125HZ—315HZ—800HZ—2KHZ—
			Refer to Introduction of audio adjustments on
	5KHZ—12.5KHZ
			page 44.
	4 Push MULTI-CONTROL up or down to		2 Use MULTI-CONTROL to select SUB W1.
	adjust the level of the equalizer band.
	Each time MULTI-CONTROL is pushed up or		3 Press MULTI-CONTROL to turn subwoo-
	down, the level of the equalization band in-		fer output on.
	creases or decreases.		NORMAL appears in the display. Subwoofer
	+6 to –6 is displayed as the level is increased		output is now on.
	or decreased.		# To turn subwoofer output off, press
	# You can then select another band and adjust		MULTI-CONTROL again.
	the level.		4 Push MULTI-CONTROL left or right to
	5 Press BAND to cancel the 7-band gra-		select the phase of subwoofer output.
	phic equalizer adjustment.		Push MULTI-CONTROL left to select reverse
			phase and REVERSE appears in the display.
	Adjusting loudness		Push MULTI-CONTROL right to select normal
			phase and NORMAL appears in the display.
	Loudness compensates for deficiencies in the		Adjusting subwoofer settings
	low- and high-sound ranges at low volume.
	1 Display the audio menu.		When the subwoofer output is on, you can ad-
			just the cut-off frequency and the output level
	Refer to Introduction of audio adjustments on
			of the subwoofer.
	page 44.
			Only frequencies lower than those in the se-
	2 Use MULTI-CONTROL to select		lected range are outputted from the subwoo-
	LOUDNESS.		fer.
	3 Press MULTI-CONTROL to turn loudness		! When the subwoofer output is on, you can
			select SUB W2.
	on.		1 Display the audio menu.
	Loudness level (e.g., MID) appears in the dis-
	play.		Refer to Introduction of audio adjustments on
	# To turn loudness off, press MULTI-CONTROL		page 44.
	again.		2 Use MULTI-CONTROL to select SUB W2.
	4 Push MULTI-CONTROL left or right to		3 Push MULTI-CONTROL left or right to
	select a desired level.
			select cut-off frequency.
	Each time MULTI-CONTROL is pushed left or
			Each time MULTI-CONTROL is pushed left or
	right, level is selected in the following order:
			right, cut-off frequencies are selected in the
	LOW (low)—MID (mid)—HIGH (high)
			following order:
			50HZ—63HZ—80HZ—100HZ—125HZ

46 En