Epson EMP-30 Adjusting the Sync, Procedure, the Video menu, Press the Menu button on the remote

Adjusting the Image Quality

Adjusting the Sync

Using the EPSON Cinema Filter

Selecting the Colour Mode

Changing the Aspect Ratio

Adjusting Computer Images

If flickering, fuzziness or interference appear in images that are input from the computer, and this cannot be fixed using automatic setup, you will need to adjust the sync manually using the following procedure.

Procedure
1	Video								Press the [Menu] button on the remote
			EPSON Cinema Filter : ON				OFF		control, and then select "Sync." from
	Audio		Position			Adjust
	Setting		Tracking	:	0				the "Video" menu.
	Advanced		Sync .	:	0
	About		Brightness	:	0	-		+	For details on this operation, refer to "Using the
	Reset All		Contrast	:	0	-		+
			Sharpness	:	0	-		+	Configuration Menus". (p.27)
			Color Mode			Select [Normal		]
			Input Signal :		RGB YUV( YCbCr			YPbPr)
			Auto Setup :		ON	OFF
			Reset			Execute
	: Return	: Select	: Adjust

2	Video		EPSON Cinema Filter :				ON	OFF
	Audio		Position		Adjust
	Setting		Tracking	:	0
	Advanced		Sync .	:	10
	About		Brightness	:	0	-			+
	Reset All		Contrast	:	0	-			+
			Sharpness	:	0	-			+
			Color Mode		Select [Normal				]
			Input Signal :		RGB	YUV( YCbCr			YPbPr)
			Auto Setup :		ON	OFF
			Reset			Execute
	: Return	: Select	: Adjust

Press the [] and [] buttons to set the sync value.

The sync value increases or decreases each time a button is pressed.

3 After making the adjustment, press the [Menu] button to exit the configuration menu.

•If you adjust the sync without adjusting the tracking first, it will not be possible to get the best

adjustment results. Incorrect tracking adjustment may not be noticeable with some types of picture. However, pictures with lots of lines and shading will tend to show incorrect tracking adjustments more clearly, so be sure to check the tracking adjustment first.

•It may also be possible to fix flickering and fuzziness by adjusting the brightness, contrast, sharpness and keystone correction settings.

18