Epson EMP-30 manual Turning Off the Projector, Basic Operations, Procedure, projector, control

Turning Off the Projector

Follow the procedure below to turn off the power for the projector.

Procedure

1				Turn off the power for the signal
				sources that are connected to the
				projector.
				Check that the power for all connected
				components has been turned off.
2	Projector	Remote control		Press the [Power] button on either the
			Power	projector's control panel or the remote
		Computer	S-Video/Video Color Mode	control.
		Menu	A/V Mute Freeze
			E-Zoom
	Power OFF?			The confirmation message shown left will appear.
				If you do not want to turn off the power, press any
	Please press	key again		button except the [Power] button.
	to power off .			If you do not press any button, the message will
				disappear automatically after seven seconds. (The
				power will not turn off at this time.)
3	Stops flashing and lights orange			Press the [Power] button once more.
				The lamp will switch off. The Power indicator
				will flash orange and cool-down will start.
				The cool-down period lasts for about 20 seconds.
				(This varies depending on factors such as the
				ambient air temperature.)
				When cool-down is complete, the Power
				indicator lights orange.
				The projector's control panel and remote
				control buttons cannot be operated while
				the Power indicator is flashing orange. Wait
				until it lights steadily.
4				Unplug the power cable from the
				electrical outlet.

Do not disconnect the power cable from the outlet while the Power indicator is still flashing orange, otherwise it may result in errors in projector operation and reduce the lamp unit operating life.

Basic Operations

9