Epson EMP-30 manual Turning On the Projector, Connecting the Power Cable, Procedure

Turning On the Projector

This section describes the procedure from turning on the power to projecting images.

Be sure to read the separate Safety Instructions/World-Wide Warranty Terms before projecting images.

Connecting the Power Cable

Procedure

1

2

3

4

5

Check that the power is turned off for the projector and all components connected to the projector.

Connect the video source or computer to the projector. (Setup Guide)

Remove the lens cover.

Connect the accessory power cable to the projector.

Check that the power cable connector is facing the same way as the power inlet on the projector, and then insert the power cable connector securely into the projector.

Lit orange	Connect the other end of the power
	cable to an earthed electrical outlet.
	Wait until the Power indicator lights orange.

The projector's control panel and remote control buttons cannot be operated while the Power indicator is flashing orange.

6