Epson EMP-30 manual Replacing the Air Filter, Appendices, Procedure, Install the new air filter

Cleaning

Replacing Consumables

Replacing the Air Filter

Procedure

1

2

Turn off the projector power, wait for thecool-down period to end, and then disconnect the power cable.

The cool-down period lasts for about 20 seconds. The actual time will vary depending on the external air temperature.

Put your finger into the recess, and pull straight out to remove the air filter.

3	Install the new air filter.
	Slide the cover in from the outside, and then push

it in until it clicks into place.

Dispose of used air filters properly in accordance with your local regulations.

Appendices

49