Epson EMP-30 manual Advanced Menu

Using the Configuration Menu Functions

Sub-menu	Function	Default
Prompt	Sets whether the input signal name is displayed on the screen or not when the	ON
	input signal is changed.
Color Mode	Sets whether the colour mode prompt is displayed on the screen or not when	ON
Prompt	the colour mode is changed.
A/V Mute	Sets the screen status when the [A/V Mute] button on the remote control is	Black
	pressed.
Sleep Mode	Sets the energy saving operation when no signal is being input.	ON
	• When set to "ON", projection stops automatically and then after the cool-
	down period is finished, the projector changes to sleep mode if no
	operations are carried out for 30 minutes while the "No-Signal." message is
	being displayed. (The Power indicator lights orange.)
	• Projection starts again when the [Power] button on the projector's control
	panel or the remote control is pressed.
Reset	Resets all adjustment values for the "Setting" menu functions to their default	-
	settings.
	• Press the [Enter] button to display the confirmation screen, and select "Yes".
	• Select "Reset All" to return all menu settings–including settings for the
	"Video" and "Audio" menus–to their default settings. (p.26)

"Advanced" Menu

Video	Language		Select [English]
Audio	Color Adjustment	:
Setting	Color Temp.			RGB	Adjust
Advanced	Rear Proj .	:	ON	OFF
About	Ceiling	:	ON	OFF
Reset All	Reset		Execute

: Select : Enter

Sub-menu		Function	Default
Language	Sets the language for message displays.		English
	• Press the [Enter] button and select the language from the selection menu that
	appears.
Color	Adjusts the colour temperature and intensity of each RGB colour for each		Color
Adjustment	input source.		Temp.:
	• Color Temp. : Lets you adjust bright colours within a range from reddish		Depends on
		tinges to bluish tinges.	connection
		If the colour temperature is lower, colours appear reddish and
		colour tones appear softer.
		If the colour temperature is higher, colours appear bluish and
		colour tones appear sharper.
		Press the [Enter] button and make the adjustment in the colour
		adjustment sub-menu that appears.
	• RGB	: Sets the colour intensity for each RGB (red/green/blue) colour
		in the image.
		Press the [Enter] button, select "R" (red), "G" (green) or "B"
		(blue) and make the adjustment in the colour adjustment sub-
		menu that appears.
		You can adjust the colours while viewing the results on the
		screen.
	(This item cannot be selected if "sRGB" has been selected as the "Color Mode"
	setting in the "Video" menu.)

24