Epson EMP-30 manual Adjusting the Image Quality, Using the EPSON Cinema Filter, Procedure

Adjusting the Image Quality

The quality of the screen images can be adjusted as follows.

Using the EPSON Cinema Filter

When the accessory EPSON cinema filter is attached to the projector and the "EPSON Cinema Filter" command is set to "ON", the images are adjusted to the optimum tint for movie theatre images.

If a computer is connected and the projector is being used for a presentation at such times, images will appear darker than normal, so remove the EPSON cinema filter and change the "EPSON Cinema Filter" setting to "OFF".

Procedure

1

Attach the accessory EPSON cinema

Projectionfilter.

Align the projection on the focus ring with the notch in the EPSON cinema filter and attach the EPSON cinema filter.

•The EPSON cinema filter should always be installed so that the notch is aligned with the projection on the focus ring. If the EPSON cinema filter is not installed correctly, unevenness or lack of focus may occur in the projected images.

•Do not touch the glass surfaces of the EPSON cinema filter or the projector's lens when attaching the EPSON cinema filter. If fingerprints or smears get on the glass surfaces, it will reduce the clarity of projection.

2	Video		EPSON Cinema Filter :					ON	OFF
	Audio			Position		Adjust
	Setting			Brightness	:	0		-			+
	Advanced			Contrast	:	0		-			+
	About			Color	:	0		-			+
	Reset All			Tint	:	0		-			+
				Sharpness	:	0		-			+
				Color Mode		Select [Theatre					]
				Video Signal		Select [Auto				]
				Aspect Ratio:		4:	3		16:	9
				Reset			Execute
	: Return	/	: Select	: Set

Press the [Menu] button on the remote control, and then select "EPSON Cinema Filter" from the "Video" menu.

For details on this operation, refer to "Using the Configuration Menus". (p.27)

3 Select "ON" and then press the [Enter] button.

4 After changing the setting, press the [Menu] button to exit the configuration menu.

14