Epson EMP-30 manual Replacing Consumables, Inserting the Battery, Appendices, Procedure, control

Cleaning

Replacing Consumables

Replacing Consumables

This section describes how to replace the remote control battery, the lamp and the air filter.

Inserting the Battery

Use the following type of battery as a replacement. 1 CR2025 lithium battery

Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the battery.

Procedure

1	Remove the battery holder.
	While pushing the catch of the battery holder

inwards, pull the battery holder out.

Catch

2	New
	battery

mark

Old battery

Remove the old battery and insert the new battery.

Check the position of the (+) mark inside the battery holder to ensure that that battery is inserted the correct way.

3	Insert the battery holder into the remote
	control.
	Push the battery holder in until it clicks.
	Dispose of used batteries in accordance
	with local waste disposal regulations.

Appendices

45