Eventhough your audio player does not con-
taina Bluetooth module, you can still control
itfrom this unit via Bluetooth wireless technol-
ogyusing a Bluetooth adapter (sold sepa-
rately).
1Devicename
Showsthe device name of the connected
Bluetoothaudio player (or Bluetooth adapter).
Connecting a Bluetooth audioplayer
!Beforeyou can use audio players you may
needto enter the PIN code into this unit. If
yourplayer requires a PIN code to establish
aconnection, look for the code on the
playeror in its accompanying documenta-
tion.Refer to Entering PIN code for Blue-
toothwireless connection on page 51.

Usinga Bluetooth audio player to

initiatea connection

1 PressMULTI-CONTROL to display the
mainmenu.
2 UseMULTI-CONTROL to select
CONNECTION.
Turnto change the menu option. Press to se-
lect.
3 TurnMULTI-CONTROL to select
BTAUDIO DEVICE.
#Ifthere is previous connection log in this unit,
youcan select the Bluetooth device from
PAIREDDEVICE.
Referto Connecting a paired Bluetooth audio
player.
4 UseMULTI-CONTROL to select a group.
PushMULTI-CONTROL up or down to select a
group.
NOKIA(Nokia)STANDARD (standard)
#Normallyselect STANDARD. If the device of
Nokiais not paired to this unit, select NOKIA.
#PushMULTI-CONTROL left or right to display
agroup name or an ID.
5 PressMULTI-CONTROL to open the con-
nection.
READYwill be displayed.
Thisunit is now on standby for connection
fromBluetooth audio player.
#PushMULTI-CONTROL left or right to display
thedevice name, BD address and PIN code of
thisunit.
6 Useyour Bluetooth audio player to es-
tablishconnection.
PINcode is set to 0000 as the default. You can
changethis code in the initial setting. Refer to
EnteringPIN code for Bluetooth wireless con-
nectionon page 51.
Whileconnecting, CONNECTING is displayed.
Ifthe connection is established, CONNECTED
isdisplayed.
#Ifthe connection fails, ERROR is displayed. In
thiscase, try again from the beginning.

Connectinga paired Bluetooth audio

player

1 PressMULTI-CONTROL to display the
mainmenu.
2 UseMULTI-CONTROL to select
CONNECTION.
Turnto change the menu option. Press to se-
lect.
3 TurnMULTI-CONTROL to select
PAIREDDEVICE.
Paireddevice name will be displayed.
#PushMULTI-CONTROL left or right to switch
thedevice name, BD address, group name and
groupID.
Operating this unit
En 27
Section
02
Operatingthis unit