4 PushMULTI-CONTROL up or down to
adjustthe output level of the subwoofer.
Eachtime MULTI-CONTROL is pushed up or
down,subwoofer level increases or decrease s.
+6to -24 is displayed as the level is increased
ordecreased.
Boosting the bass
Bassboost function boosts the bass level of
sound.
1 Displaythe audio menu.
Referto Introduction of audio adjustments on
page44.
2 UseMULTI-CONTROL to select
BASSBOOST.
3 PushMULTI-CONTROL up or down to
selecta desired level.
0to+6 is displayed as the level is increased or
decreased.
Using the high pass filter
Whenyou do not want low sounds from the
subwooferoutput frequency range to play
fromthe front or rear speakers, turn on the
HPF(high pass filter). Only frequencies higher
thanthose in the selected range are output
fromthe front or rear speakers.
1 Displaythe audio menu.
Referto Introduction of audio adjustments on
page44.
2 UseMULTI-CONTROL to select
HIGHPASS FILTER.
3 PressMULTI-CONTROL to turn high
passfilter on.
80HZappears in the display. High pass filter is
nowon.
#Ifthe high pass filter has been previously ad-
justed,the frequency of that previously selected
willbe displayed instead of 80HZ.
#Toturn high pass filter off, press
MULTI-CONTROLagain.
4 PushMULTI-CONTROL left or right to
selectcut-off frequency.
Eachtime MULTI-CONTROL is pushed left or
right,cut-off frequencies are selected in the
followingorder:
50HZ63HZ80HZ100HZ125HZ
Adjusting source levels
Sourcelevel adjustment (SLA) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM volume level,
whichremains unchanged.
1 Comparethe FM volume level with the
levelof the source you wish to adjust.
2 Displaythe audio menu.
Referto Introduction of audio adjustments on
page44.
3 UseMULTI-CONTROL to select SLA.
4 PushMULTI-CONTROL up or down to
adjustthe source volume.
Eachtime MULTI-CONTROL is pushed up or
down,source volume increases or decreases.
+4to 4is displayed as the source volume is
increasedor decreased.
Notes
!TheAM volume level can also be adjusted
withsource level adjustments.
!Thebuilt-in CD player and the multi-CD player
areset to the same source level adjustment
volumeautomatically.
!Externalunit 1 and external unit 2 are set to
thesame source level adjustment volume
automatically.
!XMtuner and SIRIUS tuner are set to the
samesource level adjustment volume auto-
matically.
Audio Adjustments
En 47
Section
03

AudioAdjustments