20
En
4 Shaping the Sound

Adjusting the bass and treble

The simplest way to shape the sound is by adjusting the amount of bass and treble.
Note: The bass and treble controls have no effect when using the DSP modes, or when
the Dolby/DTS mode is set to anything other than AUTO, STANDARD or SURROUND
OFF.
1 Press SYS then SOUND
CONTROL.
2 Use the @ or # buttons to select BASS or TREBLE.
3 Use the % and buttons to adjust the sound.
You can see the current level in the display.
4 Press ENTER to set the level.

Using P.Bass

In addition to the standard controls for adjusting bass and treble, this system has a
P.Bass feature. Switch this on to further extend the bass.
Note: P.Bass has no effect when listening through headphones.
Press SYS then P.BASS to switch P.BASS on or off.