Pioneer HTZ-55DV Switching the TV system output, Setting the display brightness

56
En
13 Additional Information
Switching the TV system output
DVD and Video CD discs are recorded in either PAL or NTSC format. This setting
determines which TV signal format is output to your TV.
1 With the system in standby, press SYS then SETUP.
2 Press the @ or # button until you see
DVD VIDEO in the display.
3 Use the % and fi buttons to select a video out setting.
•DVD VIDEO AUTO – default setting (video is output according to the disc loaded:
PAL if it's a PAL disc; NTSC if it's an NTSC disc). If you have a multi-system TV, leave
this setting as AUTO.
•DVD VIDEO PAL – output is always PAL, even when an NTSC disc is loaded. Use
this setting if your TV is PAL-compatible only.
•DVD VIDEO NTSC – PAL Video CDs are output as NTSC; PAL DVD discs cannot be
played on this setting. Use this setting if your TV is NTSC-compatible only.
4 Press ENTER to make the setting.
Setting the display brightness
You can adjust the brightness of the display to suit the lighting conditions of the room.
For example, in a brightly lit room you'd probably want the display brighter than in a
room with low lighting.
• Press SYS then FL DIMMER.
Press FL DIMMER repeatedly to set the display brightness. There are five levels.