Pioneer HTZ-55DV manual More programming options, Programming a CD/Video CD playlist

Using the DVD Player

Programming a CD/Video CD playlist

1Press SHIFT then PGM.

ProgramTrack
	Current:Track				1(/10)
	Total Time				0.00
	––	––	––	––	––	–– –– ––
	––	––	––	––	––	––	–– ––
	––	––	––	–– –– –– –– ––
		Move
				ENTER	Play		PROGRAM	Exit

2 Start entering track numbers.

For tracks 1 to 10, use the corresponding number button. For 11 and over, use the >10 button (>10, 2, 4 for 24, etc.)

3 Press ENTER to start playback immediately, or SHIFT then PGM to exit if you want to start playback later*

* You can’t start program playback later with a PBC Video CD: press ENTER to start.

More programming options

There are several other options available when programming/using playlists.

¥ To view the playlist, press SHIFT then PGM.

¥ To put a pause in the playlist, press 8 instead of a number.

• You can’t program two pauses in succession, or start/end a playlist with a pause.

¥To delete an entry from the playlist, position the cursor on the title/chapter/track number and press C (Clear).

¥To insert an entry into the playlist, position the cursor where you want the title/chapter/track to appear, then enter its number.

All the following entries move up one.

¥To add an entry to the end of the playlist, press SHIFT then PGM, enter the title/chapter/track number, then press SHIFT and PGM again.

¥To add the currently playing title/chapter/track to the playlist, press SHIFT then hold PGM for about 2 seconds.

•If there is no current playlist, a new one is created. (For DVD: if the last playlist programmed was for titles, then a title playlist is created; otherwise a chapter playlist is created.)

¥To delete the playlist, press 7 to stop playback, then press C (Clear).

¥To delete a memorized DVD playlist, load the DVD disc, press SHIFT then PGM, then change the Program Memory option to Off. Press ENTER to confirm.

26

En