32
En

7 Using the Timer

Using the sleep

timer

The sleep timer switches the system into
standby after a specified amount of time so
that you can fall asleep without worrying
about the stereo being left on all night. If
you've also set the wake up timer this is
important since the wake up timer will
only work if the system is in standby.
1 Press SYS.
2 Press SLEEP to set the time
until the system goes into
standby.
Press repeatedly to switch between:
•SLEEP AUTO – this setting is only
available when the system is playing a
CD *
•SLEEP 90 (minutes)
•SLEEP 60 (minutes)
•SLEEP 30 (minutes)
•SLEEP OFF (cancels the sleep timer)
The sleep timer indicator ( ) lights
when the sleep timer is active.
* not available when a Video CD is in PBC
mode, or if you're playing a CD or Video
CD in repeat mode. If you set a disc
playing in repeat mode after setting the
sleep timer to AUTO, it automatically
switches to the 90 minute setting.
• Once the sleep timer is set, you can
check the time left by pressing SLEEP.
•TO cancel the sleep timer, switch the
system into standby, or select SLEEP
OFF (as described above)
• If you switch to a different source when
SLEEP AUTO is set, the system will
automatically go into standby a
minute later.

Checking the timer

settings

If you’ve set the wake-up timer, you can
check the settings anytime. Here’s how to
do it.
1 Press SYS then TIMER CLOCK/
ADJ.
2 Press the @ or # button until
you see TIMER CHECK in the
display.
3 Press ENTER.
The display shows the timer settings:
•On time
•Off time
•Function (DVD, etc.)
•Volume