| OPERATING PROCEDURE | PHOTOS |
4. Removing the compressor | Photo 6 | |
(1) | Remove the cabinet. (Refer to 1.) | Discharge pipe |
(2) | Remove the relay panel. | |
(3) | Remove the soundproof felt. |
(4)Remove the terminal cover on the compressor.
(5)Disconnect lead wires from the glass terminal of the com- pressor.
(6)Recover gas from the refrigerant circuit.
NOTE : Recover gas from the pipes until the pressure gauge | Glass | ||
| shows 0 kg/cm2 (0 MPa). | ||
| terminal | ||
(7) | Disconnect the welded part of the discharge pipe. | ||
Suction | |||
(8) | Disconnect the welded part of the suction pipe. | pipe | |
(9) | Remove nuts fixing the compressor. | Compressor | |
| |||
(10) Remove the compressor. |
|
Compressor nuts
31