Pioneer P4000UB Initial Settings, Switching the feature demo, Setting the rear output

Section
04		Initial Settings
	2 Press MULTI-CONTROL to turn dimmer		Switching the feature demo
	on.		The feature demo automatically starts when
	# To turn dimmer off, press MULTI-CONTROL
			power to this unit is turned off while the igni-
	again.
			tion switch is set to ACC or ON.
	Setting the rear output and		1 Use MULTI-CONTROL to select
			DEMO MODE.
	subwoofer controller		2 Press MULTI-CONTROL to turn the fea-
	This unit’s rear output (rear speaker leads out-
			ture demo on.
	put) can be used for full-range speaker (FULL)		# To turn the feature demo off, press
	or subwoofer (SUB W) connection. If you		MULTI-CONTROL again.
	switch the rear output setting to SUB W, you
	can connect a rear speaker lead directly to a		Notes
	subwoofer without using an auxiliary amp.		! Remember that if the feature demo continues
	Initially, the unit is set for rear full-range speak-
			operating when the car engine is turned off, it
	er connection (FULL).
			may drain battery power.
	1 Use MULTI-CONTROL to select		! You can also turn on or off feature demo by
	SW CONTROL.		pressing DISP while this unit is turned off. For
			more details, see About the demo mode on
	2 Press MULTI-CONTROL to display the		page 8.
	setting mode.
	# Press BACK to return to the previous display.

3Use MULTI-CONTROL to select the de- sired setting.

Turn to change the setting.

SUB W (subwoofer)—FULL (full-range speak-

er)

# When no subwoofer is connected to the rear

output, select FULL.

# When a subwoofer is connected to the rear output, set for subwoofer SUB W.

Notes

!Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 25).

!If you change this setting, subwoofer output

in the audio menu return to the factory settings.

Switching the Ever Scroll

When Ever Scroll is set to ON, recorded text in- formation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Use MULTI-CONTROL to select

EVER SCROLL.

2Press MULTI-CONTROL to turn the Ever

Scroll on.

# To turn the Ever Scroll off, press MULTI-CONTROL again.

Activating the BT AUDIO source

You need to activate the BT AUDIO source in order to use a Bluetooth audio player.

!You can only operate this function when Bluetooth adapter (e.g. CD-BTB200) is con- nected to this unit.

28 En