Pioneer P4000UB operation manual Using the equalizer, Recalling equalizer curves

Section

Audio Adjustments

Introduction of audio	Using balance adjustment
adjustments	You can change the fader/balance setting so
1 Press MULTI-CONTROL to display the	that it can provide the ideal listening environ-
	ment in all occupied seats.
main menu.
2 Use MULTI-CONTROL to select AUDIO.	1 Use MULTI-CONTROL to select
	FADER/BALANCE.
Turn to change the menu option. Press to se-
lect.	2 Press MULTI-CONTROL to display the
3 Turn MULTI-CONTROL to select the	setting mode.
audio function.	3 Press MULTI-CONTROL to select the seg-
Turn MULTI-CONTROL to switch between the
	ment you wish to set.
audio functions in the following order.
	Press MULTI-CONTROL repeatedly to switch
FADER/BALANCE (balance adjustment)—
	between fader and balance.
PRESET EQUALIZER (graphic equalizer recall)
—EQ SETTING 1 (graphic equalizer adjust-	4 Turn MULTI-CONTROL to adjust speaker
ment)—EQ SETTING 2 (graphic equalizer fine	balance.
adjustment)—LOUDNESS (loudness)—	Front/rear speaker balance can be adjusted
SW SETTING 1 (subwoofer on/off setting)—	between FAD F15 and FAD R15.
SW SETTING 2 (subwoofer setting)—	Left/right speaker balance can be adjusted be-
HIGH PASS FILTER (high pass filter)—	tween BAL L15 and BAL R15.
BASS BOOST (bass boost)—SRC LV ADJUST	# You can also perform the same operations by
(source level adjustment)	pushing MULTI-CONTROL up or down.
4 Press MULTI-CONTROL to display the	# FAD 0 is the proper setting when only two
	speakers are used.
setting mode of each function.
	# When the rear output setting is SUB W, ad-
5 Adjust the each function.	justing the front/rear speaker balance is not effec-
	tive. Refer to Setting the rear output and
Notes	subwoofer controller on page 28.
! You can also select the audio function by
pressing AUDIO on the remote control.	Using the equalizer
! To return to the previous display, press BACK.
	The equalizer lets you adjust the equalization
! To return to the main menu, press and hold
BACK.	to match the car’s interior acoustic character-
! To return to the ordinary display, press	istics as desired.
BAND/ESC.
! You can select the SW SETTING 2 only when	Recalling equalizer curves
subwoofer output is turned on in
	There are six stored equalizer curves which
SW SETTING 1.
	you can easily recall at any time. Here is a list
! When selecting FM as the source, you cannot
	of the equalizer curves.
switch to SRC LV ADJUST.
! If you do not operate functions within about
	Display	Equalizer curve
30 seconds, the display automatically returns
	POWERFUL	Powerful
to the ordinary display.

03

English

NATURAL Natural

En 23