Pioneer DEH-P310UB Selecting the Sirius channel select mode, Using the Game Alert function

Available accessories

Section

06

Selecting the SIRIUS channel select mode

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

%Press S.Rtrv/SAT repeatedly to select the desired channel select setting.

MODE CH NUMBER (channel number select setting)—MODE CATEGORY (channel cate- gory select setting)

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

Selecting a channel in the channel category

1Select the channel select settings to

MODE CATEGORY.

Refer to Selecting the SIRIUS channel select mode on this page.

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Selecting teams for Game Alert

1Use MULTI-CONTROL to select

TEAM SETTING in the function menu.

2Press MULTI-CONTROL to display the setting mode.

3Press MULTI-CONTROL to select a de- sired league.

4Turn MULTI-CONTROL to select a de-

sired team.

# You can also perform the same operations by pushing MULTI-CONTROL up or down.

5Press and hold MULTI-CONTROL to turn the game alert of the selected team on. The game alert function will start on that

team.

# When you have already made 12 team selec- tions, FULL is displayed and additional team se- lection is not possible. In this case, first delete the team selection and then try again.

6Repeat these steps for selecting other teams.

Up to 12 teams can be selected.

English

Using the Game Alert function

This system can alert you when games invol- ving your favorite teams are about to start. To use this function you need in advance to set up a game alert for the teams.

!To use this function, Pioneer SIRIUS bus in- terface (e.g. CD-SB10) is required.

!To use this function, SIRIUS plug-and-play unit with Game Alert Function is required.

!For details, refer to SIRIUS plug-and-play unit’s manuals.

!You can also operate this function when SIR-PNR2 is connected to this unit.

En 43