Notes
!Toreturn to the previous display, press
DISP/BACK/SCRL.
!Toreturn to the main menu, press and hold
DISP/BACK/SCRL.
!Toreturn to the playback display, press
BAND/ESC.
!DEVICEINFO is the same as that of the Blue-
toothaudio. (Refer to Displaying BD (Bluetooth
Device)address on page 33.)
!Ifa cellular phone is connected to this unit via
Bluetoothwireless technology with HSP
(HeadSet Profile), CLEAR MEMORY,
NUMBERDIAL and REFUSE CALLS cannot be
selected.
!Ifyou do not operate functions other than
SEARCHPHONE,CONNECTION OPEN,
CONNECTPHONE,PH BOOK TRANSFER,
DISCONNECTPHONE,NUMBER DIAL and
CLEARMEMORY within about 30 seconds,
thedisplay automatically returns to the ordin-
arydisplay.
Connecting a cellular phone

Searchingfor available cellular phones

1 UseMULTI-CONTROL to select
SEARCHPHONE in the function menu.
2 PressMULTI-CONTROL to search for
availablecellular phones.
Whilesearching, SEARCHING flashes. When
availablecellular phones featuring Bluetooth
wirelesstechnology are found, device name or
NAMENOT FOUND (if names cannot be ob-
tained)is displayed.
#Ifthis unit fails to find any available cellular
phones,NOT FOUND is displayed.
3 TurnMULTI-CONTROL to select a device
nameyou want to connect.
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
4 PressMULTI-CONTROL to connect the
selectedcellular phone.
Whileconnecting, CONNECTING flashes. To
completethe connection, check the device
name(PIONEER BT UNIT) and enter the link
codeon your cellular phone. If the connection
isestablished, CONNECTED is displayed.
#PINcode is set to 0000 as the default. You
canchange this code in the initial setting. Refer
toEntering PIN code for Bluetooth wireless con-
nectionon page 28.

Usinga cellular phone to initiate a

connection

1 UseMULTI-CONTROL to select
CONNECTIONOPEN in the function menu.
2 PressMULTI-CONTROL to open the con-
nection.
ALWAYSWAITING flashes and the unit is
nowon standby for connection from a cellular
phone.
3 Usecellular phone to connect to this
unit.
Tocomplete the connection, check the device
name(PIONEER BT UNIT) and enter the link
codeon your cellular phone. If the connection
isestablished, CONNECTED is displayed.
#PINcode is set to 0000 as the default. You
canchange this code in the initial setting. Refer
toEntering PIN code for Bluetooth wireless con-
nectionon page 28.
#Ifthe connection fails, ERROR is displayed. In
thiscase, try again from the beginning.
Disconnecting a cellular phone
1 UseMULTI-CONTROL to select
DISCONNECTPHONE in the function menu.
Devicename of the connected phone appears
inthe display.
2 PressMULTI-CONTROL to disconnect a
cellularphone from this unit.
Afterdisconnection is completed,
DISCONNECTEDis displayed.
Available accessories
En
36
Section
06