Pioneer DEH-P310UB Audio Adjustments Introduction of audio, Using balance adjustment

Audio Adjustments

Introduction of audio	! When selecting FM as the source, you cannot
adjustments	switch to SRC LV ADJUST.
	! If you do not operate functions within about
1 Press MULTI-CONTROL to display the	30 seconds, the display automatically returns
main menu.	to the ordinary display.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-	Using balance adjustment
lect.
	You can change the fader/balance setting so
3 Turn MULTI-CONTROL to select the
	that it can provide the ideal listening environ-
audio function.	ment in all occupied seats.
Turn MULTI-CONTROL to switch between the	1 Use MULTI-CONTROL to select
audio functions in the following order.
FADER/BALANCE (balance adjustment)—	FADER/BALANCE in the audio function
PRESET EQUALIZER (equalizer recall)—	menu.
EQ SETTING 1 (equalizer adjustment)—	2 Press MULTI-CONTROL to display the
EQ SETTING 2 (equalizer fine adjustment)—
	setting mode.
LOUDNESS (loudness)—SW SETTING 1 (sub-
woofer on/off setting)—SW SETTING 2 (sub-	3 Press MULTI-CONTROL to select the seg-
woofer setting)—HIGH PASS FILTER (high
	ment you wish to set.
pass filter)—BASS BOOST (bass boost)—
	Press MULTI-CONTROL repeatedly to switch
SRC LV ADJUST (source level adjustment)
	between fader and balance.
4 Press MULTI-CONTROL to display the	4 Turn MULTI-CONTROL to adjust speaker
setting mode of each function.
	balance.
# Push MULTI-CONTROL left to display the
	Front/rear speaker balance can be adjusted
function selection menu.
	between FAD F15 and FAD R15.
# Push and hold MULTI-CONTROL left to dis-
	Left/right speaker balance can be adjusted be-
play the main menu.
	tween BAL L15 and BAL R15.
5 Adjust the each function.	# You can also perform the same operations by
	pushing MULTI-CONTROL up or down.
Notes	# FAD 0 is the proper setting when only two
	speakers are used.
! To return to the previous display, press
	# When the rear output setting is
DISP/BACK/SCRL.	REAR SP :SUB W, adjusting the front/rear speak-
! To return to the main menu, press and hold	er balance is not effective. Refer to Setting the
DISP/BACK/SCRL.	rear output and subwoofer controller on page
! To return to the ordinary display, press	27.
BAND/ESC.
! When the subwoofer controller setting is
PREOUT:REAR, you cannot switch to	Using the equalizer
SW SETTING 1 (subwoofer on/off setting).
	The equalizer lets you adjust the equalization
(Refer to page 27.)
! You can select the SW SETTING 2 only when	to match the car’s interior acoustic character-
subwoofer output is turned on in	istics as desired.
SW SETTING 1.

Section

03

English

En 23