Pioneer DEH-P310UB Operating this unit Basic Operations, Power ON/OFF, Selecting a source

Section
02		Operating this unit
	Basic Operations		! Charging the portable audio player using
	Power ON/OFF		car’s DC power source while connecting it to
			AUX input may generate noise. In this case,
	Turning the unit on		stop charging.
			! External unit refers to a Pioneer product (such
	% Press SRC/OFF to turn the unit on.
			as ones available in the future) that, although
			incompatible as a source, enables control of
	Turning the unit off		basic functions with this unit. Two external
	% Press SRC/OFF and hold until the unit		units can be controlled with this unit. When
			two external units are connected, the external
	turns off.
			unit is automatically allocated to external unit
			1 or external unit 2 by this unit.
	Selecting a source		! When this unit’s blue/white lead is connected
	You can select a source you want to listen to.		to the vehicle’s auto-antenna relay control
			terminal, the vehicle’s antenna extends when
	% Press SRC/OFF repeatedly to switch be-		this unit’s source is turned on. To retract the
	tween the following sources.		antenna, turn the source off.
	XM TUNER (XM tuner)—SIRIUS (SIRIUS
	tuner)—HD RADIO (HD Radio tuner)—		Adjusting the volume
	TUNER (tuner)—COMPACT DISC (built-in CD
	player)—MULTI CD (multi-CD player)—USB		% Turn MULTI-CONTROL to adjust the
	(USB)/USB-IPOD (iPod connected using USB		sound level.
	input)—EXTERNAL (external unit 1)—
	EXTERNAL (external unit 2)—AUX1 (AUX1)—
	AUX2 (AUX2)—BT AUDIO (BT audio)—
	TELEPHONE (BT telephone)

Notes

!In the following cases, the sound source will not change.

—When no unit corresponding to the se- lected source is connected.

—When there is no disc or magazine in the player.

—When AUX (auxiliary input) is set to off (refer to page 27).

—When the BT AUDIO source is set to off (refer to page 28).

!If the HD Radio tuner is connected to this unit, tuner source is skipped.

!When a USB storage device or iPod is not connected to the USB port of this unit, NO DEVICE is displayed.

!AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxili- ary setting on page 27).

12 En