Pioneer DEH-P310UB Adjusting loudness, Using subwoofer output

Qfactor
2W—1W—1N—2N
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 UseMULTI-CONTROL to select
LOUDNESSin the audio function menu.
2 PressMULTI-CONTROL to display the
settingmode.
3 UseMULTI-CONTROL to select the de-
siredsetting.
Turnto change the setting.
LOW(low)—MID (mid)—HIGH (high)—OFF
(off)
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
4 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been cancelled before
determination,operation is settled.
Using subwoofer output
Thisunit is equipped with a subwoofer output
whichcan be turned on or off.
Also,phase can be selected between normal
andreverse.
1 PressSW/BASS to display the subwoo-
fersetting mode.
PressSW/BASS repeatedly to switch between
thesubwoofer setting modes in the following
order.
SWSETTING 1 (subwoofer on/off setting) set-
tingmode—SW SETTING 2 (subwoofer set-
ting)setting mode
2 SelectSW SETTING 1 setting mode.
3 TurnMULTI-CONTROL to select the de-
siredsetting.
NORMAL(normal phase)—REV (reverse
phase)—OFF(subwoofer off)
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
4 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been cancelled before
determination,operation is settled.
Note
Youcan also switch to this setting mode in the
menuthat appears by using MULTI-CONTROL.
Adjusting subwoofer settings
Whenthe subwoofer output is on, you can ad-
justthe cut-off frequency and the output level
ofthe subwoofer.
!Whenthe subwoofer output is on, you can
selectSW SETTING 2.
1 PressSW/BASS to display the subwoo-
fersetting mode.
PressSW/BASS repeatedly to switch between
thesubwoofer setting modes in the following
order.
SWSETTING 1 (subwoofer on/off setting) set-
tingmode—SW SETTING 2 (subwoofer set-
ting)setting mode
2 SelectSW SETTING 2 setting mode.
3 PressMULTI-CONTROL to select the seg-
mentyou wish to set.
PressMULTI-CONTROL repeatedly to switch
thesegment in the following order:
Cutoff frequency—Level
4 TurnMULTI-CONTROL to adjust the se-
lectedsegement.
Cutoff frequency
50HZ—63HZ—80HZ—100HZ—125HZ
Level
+6to –24 is displayed as the level is increased
ordecreased.
Audio Adjustments
En 25
English
Section
03