Pioneer DEH-P310UB Other Functions Using the AUX source, Turning the clock display on or off

Section

05Other Functions

Using the AUX source Selecting AUX as the source

Up to two auxiliary devices such as VCR or portable devices (sold separately) can be con- nected to this unit. When connected, auxiliary devices are automatically read as AUX sources and assigned to AUX1 or AUX2. The relation- ship between AUX1 and AUX2 sources is ex- plained below.

%Press SRC/OFF to select AUX as the

source.

# If the auxiliary setting is not turned on, AUX

cannot be selected. For more details, refer to Switching the auxiliary setting on page 27.

About AUX1 and AUX2

There are two methods to connect auxiliary de- vices to this unit.

AUX1 source:

When connecting auxiliary device using a stereo mini plug cable

%Insert the stereo mini plug into the input jack on this unit.

For more details, refer to Head unit on page 9. This auxiliary device is automatically set to AUX1.

Turning the clock display on or off

You can turn the clock display on or off.

!Even when the sources are off, the clock display appears on the display.

%Press CLOCK/DISP OFF to turn the clock display on or off.

Each press of CLOCK/DISP OFF turns the

clock display on or off.

# The clock display disappears temporarily

when you perform other operations, but the clock display appears again after 25 seconds.

AUX2 source:

When connecting auxiliary device using an IP- BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) to connect this unit to auxiliary device fea- turing RCA output.

For more details, refer to the IP-BUS-RCA Inter- connector owner’s manual.

This auxiliary device is automatically set to

AUX2.

# You can only make this type of connection if the auxiliary device has RCA outputs.

Switching the display indication and button illumination

Display indication and button illumination can be switched on or off.

%Press and hold CLOCK/DISP OFF. Pressing and holding CLOCK/DISP OFF switches the display indication and button illu-

mination on or off.

# While the display indication is turned off,

CLOCK/DISP OFF button lights up.

# Even if the display indication is turned off, op- eration can be conducted. If operation is con- ducted while the display indication is off, display

will light up for a few seconds and then turn off again.

30 En