Connecting the Unit

Connecting the Speakers and Input Wires

The speaker output mode can be four-channel, three-channel (stereo + mono) or two-channel (stereo, mono). Connect the speaker leads to suit the mode according to the figures shown below.

Four-channel

Input select switch is on the top of the unit. For two- channel input, slide this switch to the left. For four- channel input, slide this switch to the right.

RCA input jack A

(Left)

RCA input jack B

Speaker out B

(Right)

 

 

+≠≠+

Connecting wires with RCA plugs (sold separately)

From car stereo (RCA output)

If only one input plug is used, such as when the car stereo has only one output (RCA output), connect the plug to RCA input jack A, but do not connect a plug to RCA input jack B.

+≠≠+

(Right) Speaker out A (Left)

Three-channel

Input select switch is on the top of the unit. For two- channel input, slide this switch to the left. For four- channel input, slide this switch to the right.

RCA input jack A

RCA input jack B

≠

+

Speaker out B (Mono)

Connecting wires with RCA plugs (sold separately)

From car stereo (RCA output)

If only one input plug is used, such as when the car stereo has only one output (RCA output), connect the plug to RCA input jack A, but do not connect a plug to RCA input jack B.

+≠≠+

(Right) Speaker out A (Left)

9