Connection Diagram
•This diagram shows connections using external output (subwoofer output). Slide the input switch to the left.
•When you connect with speaker output, connections defers from the diagram. For details, see the “Using the Speaker Input” section. In either case, you need to set the input switch. For details, see the “Setting the Unit” section.
| Fuse (30 A) |
| Special red battery wire |
| After making all other connections at the amplifier, |
| connect the battery wire terminal of the amplifier to |
| the positive (+) terminal of the battery. |
Grommet | Fuse (30 A) |
| Ground wire (Black) |
| Connect to metal body or chassis. |
External Output |
|
|
|
| |
If only one input plug is used, do |
|
|
| Car stereo with | |
not connect anything to RCA |
|
|
| ||
|
|
| RCA output jacks | ||
input jack B. |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Connecting wire with RCA pin plugs (sold separately).
RCA output jack
Speaker output terminal
See the “Connecting the
Fuse (30 A) ⋅ 2Speakers and Input Wires” section for speaker connection instructions.
RCA input jack B
RCA input jack A
Amplifier with
RCA input jacks
RCA input
êìëëäàâ NEDERLANDS ITALIANO
System remote control wire (sold separately) |
| |
Connect the male terminal of this wire to the system remote control |
| |
terminal of the car stereo (SYSTEM REMOTE CONTROL). The female |
| |
terminal can be connected to the |
| |
car stereo does not have a system remote control terminal, connect the | 6 | |
male terminal to the power terminal through the ignition switch. | ||
|