Pioneer RS-A9/EW manual Specifications, General, Bdsp/Preamp, Power Amp

	1		2
	1. SPECIFICATIONS
A	GENERAL
	Power Source		DC14.4V (10.8 — 15.1V allowable)
	Grounding system		Negative type
	Max. Current consumption
	(Rated Power)		31A
	(No signal)		5A
	Average Current consumption
	(4ch 4Ω	)	12A
	(2ch 4Ω	)	16.5A
	Backup current		3mA or less
	Fuse		25Ax2
	Dimensions		330(W)x71(H)x585(D)mm
	Weight		13kg

BDSP/PREAMP

	Tone controls (parametric)
	Bass frequency		63Hz,100Hz,160Hz,250Hz
	Treble frequency		4kHz,6.3kHz,10kHz,16kHz
	Gain		±12dB
	31-band graphic equalizer (L/R independent)
	Frequency		20Hz—20 kHz,1/3oct.
	Gain		±12dB (0.5dB)
	3-band parametric equalizer (L/R independent)
	Frequency		20Hz—20kHz,1/3oct.
	Gain		±12dB (0.5dB)
	Crossover network (L/R independent)
C	SUBWOOFER
	........................	HPF frequency : 20Hz—100Hz,1/3oct.
	........................	LPF frequency : 40Hz—250Hz,1/3oct.
	......................................		Gain : +10dB—–24dB (0.5dB)
	LOW	HPF frequency : 25Hz—250Hz,1/3oct.
	.......................	LPF frequency : 250Hz—10kHz,1/3oct.
	..........................................		Gain : 0dB—–24dB (0.5dB)
	MID	HPF frequency : 160Hz—10kHz,1/3oct.
	.........................	LPF frequency : 2kHz—20kHz,1/3oct.
	..........................................		Gain : 0dB—–24dB (0.5dB)
	HIGH
	.....................	HPF frequency : 1.6kHz—20kHz,1/3oct.
	.........................	LPF frequency : 8kHz—20kHz,1/3oct.
D	Slope		Gain : 0dB—–24dB (0.5dB)
	...........PASS, –6, –12, –18, –24, –36, –48, –72dB/oct.
	.............................		(PASS:no pass HPF-High channel)
	Phase		NORMAL/REVERSE
	Time alignment
	(H/M/L ch)	.............................	0—192.5cm (0.77cm)
	(SW ch)		0—385cm (1.54cm)
	Position adjustment
	............................		DISTANCE : 0—192.5cm (0.77 cm)
	.............................................		Level : 0—–30dB (0.5dB)
	Sampling frequency		44.1kHz
E	Digital input		Optical input
	Analog Output		Optical output (3line)

F

3 4

POWER AMP

Max. power (14.4V)	100Wx4/300Wx2 (4Ω	)
Continuous power (14.4V)
...............................	50Wx4/150Wx2
(20—20kHz, 0.02/0.02% (4 Ω ))
75Wx4
(20—20kHz, 0.02% (2 Ω ))
Frequency responce	10—100kHz, (–1,+0dB)
Distortion	0.002% (1kHz,20k LPF)
S/N ratio	105dB (IHF-A)
Separation	80dB (100Hz—10kHz, 20k LPF)
Slew rate	100V/µsec
Dumping factor	150
Impedance	4Ω (2—8 Ω	)

Note:

•Specifications and the design are subject to possi- ble modification without notice due to improve- ments.

4	2
1

RS-A9/EW

3 4