Audio Adjustment <Memory Functions>
Storing the adjustment data in memory
1.Adjust each audio menu.
Equalizer menu (page 20) Network menu (page 30)
2.Switch to the memory mode of each menu (refer to page 43).
The display switches to memory operation screen of each menu.
3.To store in memory, press the FUNCTION button corresponding to the desired memory number for two seconds.
Note:
•When the adjustment data have been stored, the previous data are eliminated and replaced by the new.
4.Press the SHIFT button to cancel memory mode.
The display returns to the previous screen.
To avoid accidentally erasing stored data
•In order to avoid erasing stored data with new data, it is possible to set up a protect function (refer to page 47).
•Protect function ON/OFF switching is simultaneously performed for both memories. So, for exam- ple, if the protect function is switched ON for memory B1, it is switched ON for both base memory B1 and B2. Also, if the protect function is switched ON for M1, it is switched ON for both custom memory M1 and M2. However, the protect function does not operate for M3 and LM.
•If the protect function is ON, you cannot store information in that MEMORY button. Store infor- mation with another MEMORY button, or cancel the protect function. Since the protect function is cancelled after the memory to be cleared is called up, the current adjusted settings are automatically stored in last memory.
44
44
ENG/MASTER 96
