06

Using Stream Direct

Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed, and you’re left with the pure analog or digital sound source.

Processing differs depending on the input signal and whether or not surround back speakers are connected. For details, see Auto Surround, ALC and Stream Direct with different input signal formats on page 119.

1Press to the receiver operation mode.

2While listening to a source, press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) to select the mode you want.

Check the digital format indicators in the front panel display to see how the source is being processed.

!AUTO SURROUND – See Auto playback on page 58.

!ALC – Listening in Auto level control mode (page 58).

!DIRECT – Plays back sound from the source with the least modification next to PURE DIRECT. With DIRECT, the only modifications added to PURE DIRECT playback are calibration of the sound field by the MCACC sys- tem and the Phase Control effect.

!PURE DIRECT – Plays back unmodified sound from source with only minimal digital treatment.

!OPTIMUM SURR – Listening in Optimum Surround mode (page 58).

Note

!When listening through headphones, you can select ALC, OPTIMUM SURR or PURE DIRECT mode only.

Listening to your system

Selecting MCACC presets

!Default setting: MEMORY 1

If you have calibrated your system for different listening positions, you can switch between settings to suit the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa, or playing a video game close to the TV).

1Press to the receiver operation mode.

2While listening to a source, press MCACC.

Press repeatedly to select one of the six MCACC presets. See Data Management on page 96 to check and manage your current settings.

!These settings have no effect when headphones are connected.

!You can also press k/l to select the MCACC preset.

Choosing the input signal

On this receiver, it is possible to switch the input signals for the different inputs as described below.

!This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz) and DTS (including DTS 96/24) digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and SACD.

!You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 29) and set the signal input to DIGITAL.

!Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

1Press to the receiver operation mode.

2Press SIGNAL SEL to select the input signal corresponding to the source component.

Each press cycles through the options as follows:

!AUTO – The receiver selects the first available signal in the following order: HDMI; DIGITAL; ANALOG.

!ANALOG – Selects an analog signal.

!DIGITAL – Selects an optical or coaxial digital signal.

!HDMI – Selects an HDMI signal.

—When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this receiver.

When set to DIGITAL, HDMI or AUTO (only selected DIGITAL or HDMI), the indicators light according to the signal being decoded (see Display on page 14).

60