09 |
|
|
| Using other functions |
Resetting the system
Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Set
!Disconnect the iPod and USB memory device from the receiver beforehand.
!Set the Control with HDMI to OFF (see HDMI Setup on page 70).
1Switch the receiver into standby.
2While holding down ENTER on the front panel, press uSTANDBY/ON.
The display shows RESET cNO d.
3Select ‘RESET’ using PRESET k/l, then press ENTER on the front panel.
The display shows RESET? OK.
4Press ENTER to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory default settings.
!Note that all settings will be saved, even if the receiver is unplugged.
Default system settings
Setting | Default | ||
Digital Video Converter | ON | ||
SPEAKERS | FH/FW ON | ||
Speaker System | 9.1ch FH/FW | ||
| Front | SMALL | |
| Center | SMALL | |
Speaker Setting | FH/FW | SMALL | |
Surr | SMALL | ||
| |||
| SB | SMALLx2 | |
| SW | YES | |
Surround Position | IN REAR | ||
Crossover | 80 Hz | ||
AMP | ON | ||
OFF | |||
DIMMER | Brightest | ||
Inputs |
| ||
See Input function default and possible settings on page 47. |
| ||
|
| ||
HDMI |
| ||
|
| ||
HDMI Audio | AMP | ||
|
| ||
HDMI output | HDMI OUT ALL | ||
|
| ||
Control | OFF | ||
Control Mode | |||
ARC (Audio Return Channel) | |||
|
| ||
PQLS | |||
|
| ||
Standby Through | OFF | ||
|
| ||
DSP |
| ||
|
| ||
Power On Level | LAST | ||
|
|
| |
Setting |
| Default | |
Volume Limit |
| OFF | |
Mute Level |
| FULL | |
Phase Control |
| ON | |
| iPod/USB, INTERNET RADIO, SiriusXM, |
| |
Auto Sound Retriever | PANDORA, MEDIA SERVER, FAVORITES, | ON | |
ADAPTER PORT input function |
| ||
|
| ||
| Other input functions | OFF | |
Sound Delay |
| 0.0 frame | |
Dual Mono |
| CH1 | |
DRC |
| AUTO | |
SACD Gain |
| 0 dB | |
LFE Attenuate |
| 0 dB | |
Auto delay |
| OFF | |
|
|
| |
Digital Safety |
| OFF | |
|
|
| |
Effect Level | ExtendedStereo | 90 | |
|
| ||
Other modes | 50 | ||
| |||
|
|
| |
| Center Width | 3 | |
|
|
| |
2PL II Music Options | Dimension | 0 | |
|
|
| |
| Panorama | OFF | |
|
|
| |
|
| Neo:X CINEMA: 1.0 | |
Neo:X Options | Center Gain | Neo:X MUSIC: 0.3 | |
|
| Neo:X MUSIC: 0.3 | |
|
|
| |
2PL IIz Options | Height Gain | MID | |
All Inputs | Listening Mode (2 ch/multi ch) | AUTO SURROUND | |
Listening Mode (Headphones) | STEREO | ||
| |||
See also Setting the Audio options on page 74 for other default DSP settings. |
| ||
MCACC |
|
| |
MCACC Position Memory |
| M1: MEMORY 1 | |
Channel Level (M1 to M6) |
| 0.0 dB | |
Speaker Distance (M1 to M6) |
| 10’00’’ | |
Standing Wave (M1 to M6) | ATT of all channels/filters | 0.0 dB | |
SWch Wide Trim | 0.0 dB | ||
| |||
EQ Data (M1 to M6) | All channels/bands | 0.0 dB | |
EQ Wide Trim | 0.0 dB | ||
| |||
81