Pioneer VRD1160-A operating instructions Getting Started Switching on, Let’s Get Started

Getting Started

Switching on

After making sure that everything is con- nected properly and that the player is plugged in, press STANDBY/ON on the front panel, or on the remote control to switch the player on.

Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.

STANDBY/ON

STANDBY/ON

VIDEO OFF FL DIMMER

Î

Let’s Get Started

When you switch on the player for the first time, you should see a welcome screen displayed on your TV. From here you can set up the language and the kind of TV you have, then either use the Setup Navigator to make more settings, or jump right in and start playing some discs.

Before continuing, make sure that you’ve loaded the batteries in the remote control.

ENTER

GUIDE RETURN

04

English

•My DVD player switches on but there is nothing displayed on my TV.

Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

•If you connected this player to an AV receiver, make sure that the receiver is switched on and set to the correct input.

1Use the / (cursor up/down) buttons to choose a language, then press

ENTER.

Hello!

Select the display language

using the cursor keys on the remote

English français Deutsch Italiano Español

Choose one then press Enter

•You can also use the 0 OPEN/CLOSE button to switch on the player and open the disc tray at the same time.

•This player features a screen saver.

If the player is stopped or paused and no button is pressed for five minutes, the screen saver starts.

2Press ENTER to move on to the next screen.

Welcome to Pioneer DVD!

Thank you for purchasing this Pioneer DVD player.

Before using, please take a little time to setup your DVD player

Put the batteries into the remote control

Next, press the [ENTER] button on the remote control and start the Let's Get Started Menu

Next

21

En